Upgrade your printer to a stable, dual z setup Eliminate X gantry sagging!
Compatible with all Ender 3 variants (original, pro, and V2, etc..).
Compatible with both stock mainboard (driver - 2 motors) and aftermarket mainboards (2 drivers - 2 motors), or anything in between.
- 4x M4 screws with T-Nuts for bearing blocks
- 2x All-Metal Z Bearing Blocks for Z Rods with Bearings Pre-Installed
- 2x M4 Screws with T-Nuts for Belt Pulley Bracket
- 3x M5 Spacers for Gantry Bracket
- >3x M5 Screws for Gantry Bracket Wheels
- 1x ACM Tensioner Bracket with Idler Preinstalled
- 1x Z Rod/Leadscrew All-Metal Dual Z bracket with brass nut and
- 2x M3 Screws Nema17 Motor (w/ mounting bracket) Y-split cable extension to reach your mainboard
For original Ender 3/Pro printers, you will also need an alternative PSU mount, here are 2 examples:
In some cases, one of your motors may run backwards. Don't worry! This expected due to the vast amount of silent revisions Creality has released onto the market. Simply swap the positions of pins 1 and 3 on the side going the wrong way:
A gentle press with a tiny flathead screwdriver or a needle/pin (be careful!) would release the crimp to slide right out.
Delivery & Pick-up Info
We do NOT have a walk-in physical store to browse, etc. currently.
Courier typically takes 1-8 business days for metro cities around the east coast, a bit more for WA, Tas, and regional areas.
Pick-ups by appointment only, we typically require at least 1 day notice in advance, but sometimes may be ready within minutes/hours. We will e-mail or text you. Typical pick-up times are around 8AM-12Noon, and 10PM-12Midnight, but also available other times by scheduling ahead.