Vacuum seal have leaked, but thefilament itself perfectly fine. These filaments are sold AS IS, no returns will be accepted.
High-quality PLA+ filament for a better printing experience.
Custom collaboration blend available exclusively at ideagen3D, with polishing additives to prevent nozzle clogs. Spend more time printing, and less time on maintenance. Perfectly wound and 100% bubble-free.
PLA is the most common material used in FDM printing. It is cheap, versatile, prints super easily, and is fully bio-degradable!
|Diameter||1.75 ± 0.02 mm|
|Net Weight||1 Kg|
|Maximum Service Temperature||52 ℃|
|Coefficient of Thermal Expansion||68 µm/m°C|
|Tensile strength||≥65 mpa|
|Bending modulus||≥60 mpa|
|Fracture pull length||≥ 3.0 %|
✖ = not at all
✔ = not strictly necessary, but highly recommended
💯 = absolutely critical
|Hotend Temperature||190-220 ℃|
|Bed Temperature||40-60 ℃|
|Part Cooling Fan||✔|
|Nozzle||Brass and Above|