Creality CR-30 3DPrintMill

by Creality

$1,399.00 $1,699.00
Tax included. Shipping calculated at checkout.

Best seller among print farms!


3DPrintMill features infinite-length printing and bulk printing, saving you time and convenience! The special infinite-Z belt is the first Creality 3D printer to realize infinite build volume in the world.

Infinite-Z-axis for Endless Printing: Equipped with the rolling conveyor belt, it realizes continuous printing. High productivity, time-saving, and cost-efficient (Build volume: 200 x 170 x ∞ mm)

Stable CoreXY Structure: The stable and sturdy CoreXY precision structure with isosceles right triangle support gives you an extraordinary printing experience.

Nylon Conveyor Belt: Made of wear-resistant Nylon, the conveyor belt features excellent adhesion to the model. The printed model can fall off automatically as the belt rolls to the end for a hands-free workflow.

Strong adhesion| Hassle-free removal | Wear-resistant| Well-balanced conveyance

Dual gears metal extruder: High-quality dual gears metal extrusion, combined with the 45 degrees slanting nozzle realizing constant printing of >200 hours without pressure.

Unique 45° Printing Angle: The unique 45 ° angle design offsets the limitations of the vertical nozzle structure. Equipped with a high-performance nozzle kit, it achieves continuous printing along with the horizontal Z-axis.

Filament Breakage Detector: Whenever there is a possible accident like filament run-out or filament breakage, the smart sensor forces the machine to suspend printing. Printing will be automatically resumed after the new filament feed-in.

Ultra-silent Motherboard/Fans to Cool Down Ensure/Resume Printing.

  • Build Volume: 200 x 170 x ∞
  • Kinematics: CoreXY
  • Hardware: Belt-driven
  • Maximum Nozzle Temperature: 250 °c
  • Maximum Bed Temperature: 100 °c
  • Mainboard: Creality CR-30 Noiseless Board
  • PSU Wattage: 360W
  • Stepper drivers: TMC2208 (integrated)
  • Resolution: 0.08 mm (all axes)
  • Connections: USB & SD Card

Is an upgrade required for the material you intend to print with?

✖ = not at all

✔ = not strictly necessary, but highly recommended

💯 = absolutely critical

Material Enclosure Nozzle Hotend
CF, Wood, & Multi-Colored PLA/+
Flexibles (e.g. TPU) ✔ Direct Drive

Delivery & Pick-up Info

We do NOT have a walk-in physical store to browse, etc. currently.

Pick ups are currently suspended until further notice!

Courier typically takes 1-8 business days for metro cities around the east coast, a bit more for WA, Tas, and regional areas.