ideagen3D ToughPLA

by ideagen3D

$33.95 $34.95
Tax included. Shipping calculated at checkout.
Printing Environment

We weren't satisfied with the filament available to makers. So we decided to make our own.

What went into creating the perfect spool?

  • Pure Raw Materials
    We only use the highest quality pellets for our filament production.
    No reused plastic
  • Consistent Extrusion Process
    Each roll is Slow Wounded onto each Spool, ensuring no internal Stresses in the filament giving you reliable Prints every time. 
  • Only Pigments, no fillers
    Only Pantone Matched pigments are added to our process, giving you the best finish quality.
    No Fillers EVER
  • Automated Process Control
    We use laser dimensioning equipment to measure each spool so that each spool is perfect within 0.02mm+/-
  • *Note: Forest Greens have been mis-labelled as Moss Greens on their filament spool. We will make sure to send the actual right color, though!

    Material ToughPLA
    Diameter 1.75 ± 0.02 mm
    Length 340 m
    Net Weight 1 Kg
    Maximum Service Temperature 52 ℃
    Coefficient of Thermal Expansion 68 µm/m°C
    Tensile Strength ≥ 65 MPa
    Flexural Strength ≥ 75 MPa
    Flexural Modulus ≥ 2100 MPA
    IZOD Impact Strength ≥ 8.5 kJ/m²
    Fracture pull length ≥ 12 %
    Density 1.24 g/cm3
    Water imbibition 0.05 %


    ✖ = not at all

    ✔ = not strictly necessary, but highly recommended

    💯 = absolutely critical

    Hotend Temperature 200-230 ℃
    Bed Temperature 50-80 ℃
    Enclosure Required
    Part Cooling Fan
    Nozzle Brass and harder


    Delivery & Pick-up Info

    We do NOT have a walk-in physical store to browse, etc. currently.

    Pick ups are currently suspended until further notice!

    Courier typically takes 1-8 business days for metro cities around the east coast, a bit more for WA, Tas, and regional areas.

    Customer Reviews

    Based on 9 reviews Write a review